Please wait while the page loads...

How many miles can you drive with the check engine light?

If you check engine light is flashing, we imply that you pull over and contact Plaza Motor Company to help learn if your vehicle is protected to drive in or if we imply a tow truck. It could be anything from a bad sensor to plug wires needing to be interchanged. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly.

Will the check engine light reset itself?

The check engine light on your 2018 Mercedes-Benz SLC 300 will frequently shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going feasible, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Mercedes-Benz SLC 300 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Plaza Motor Company so the light and code can be double-checked and reset.

What Does the Check Engine Light Mean?

One of the most generally misunderstood lights or indicators in your 2018 Mercedes-Benz SLC 300 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2018 Mercedes-Benz SLC 300. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can select a variety of different things. It can be as effortless as your gas cap being loose or as compatible as engine knocking. If your check engine light is on in your 2018 Mercedes-Benz SLC 300, contact Plaza Motor Company. Our Mercedes-Benz service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Plaza Motor Company today!

2018 Mercedes-Benz SLC 300 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear prudent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your SLC 300. There are hundreds of back-up codes that your check engine light can represent. While that sounds daunting, with a microscopic patience, tackling necessary diagnostics will give you useful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, pronounced and useful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Ignition system faults
  • Computer output circuit issues
  • O2 Sensor
  • Bad Spark Plugs
  • Old Battery
  • Emissions controls issues
  • Transmission issues
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems

This is why it is necessary for someone who does not have various of automotive knowledge to not assume what a code means. Call Plaza Motor Company at 3145825294 straightaway or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out expeditiously by a certified Mercedes-Benz mechanic. If the engine light comes on due to a treacherous concern, you risk damaging your car additional by not repairing the issue fair away.

Check Engine Light Service 2018 Mercedes-Benz SLC 300

What do you do when you’re driving along in your Mercedes-Benz SLC 300 and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Mercedes-Benz owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Mercedes-Benz SLC 300 checked as soon as practical. Ignoring that warning could end up causing substantial damage to expensive engine components.

When your 2018 Mercedes-Benz SLC 300's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t fair, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is select with an electronic scan tool that is used by our Mercedes-Benz auto repair mechanics at Plaza Motor Company. There are also a number of relatively small code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced trained to advise the issue and repair it.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is consistently between $88 and $111. The distinguished news, Plaza Motor Company offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more tough failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it distinguished to get the central code reading and diagnosis.

2018 Mercedes-Benz SLC 300 Check Engine Light

A flashing light indicates that the problem is strict and if not taken care of suddenly may result in great damage to the automobile. If the check engine light in your 2018 Mercedes-Benz SLC 300 starts flashing, that means that the problem needs quick attention and your Mercedes-Benz should be delivered in suddenly. This twinkling light usually hints a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can promptly raise the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. A Few owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A damaging, erstwhile or dirty spark plug can cause the engine to misfire. If your check engine light is twinkling, please contact our team of automotive experts at Plaza Motor Company quickly by calling 3145825294. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a particularly lavish repair.

Is it safe to drive your 2018 Mercedes-Benz SLC 300 with the check engine light on?

If the check engine light is flashing, this means that there is a harsh issue and it is recommended to service your Mercedes-Benz SLC 300 urgently. This question is not very authentic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to commute. This is commonly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more strict problem. Call the veterans at Plaza Motor Company by dialing 3145825294 so you can describe the issues. Or cut your speed and deliver your 2018 Mercedes-Benz to our certified mechanics as soon as probable.

2018 Mercedes-Benz SLC 300 Check Engine Light Flashing

Although there are countless possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various decent causes consisting something as simple as a loose gas cap. Added decent reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Mercedes-Benz Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Mercedes-Benz issue was repaired.

Every 2018 Mercedes-Benz SLC 300 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its troublesome systems. The sensors are continually detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is untrue nor what to do about it. That’s where we come in; Plaza Motor Company provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Very Qualified Service technological.

What could cause the check engine light to come on in a 2018 Mercedes-Benz SLC 300?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a fantastic problem that could cause fantastic damage to your engine and come with a unusual repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow commonly means something less fantastic but a flashing check engine light suggests that your vehicle’s engine is in fantastic trouble and service is fundamental quickly. If your check engine light is flashing in your 2018 Mercedes-Benz SLC 300, we extremely recommend not to drive the vehicle and schedule Mercedes-Benz service at this moment. Below is a list of the most routine reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2018 Mercedes-Benz SLC 300’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Plaza Motor Company offers a complimentary multi-point inspection with every Mercedes-Benz service. If you have an issue with your catalytic converter and don't get it revamped, your 2018 Mercedes-Benz SLC 300 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause other problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2018 Mercedes-Benz SLC 300 if it’s not installed properly. These aftermarket elements and accessories can discharge the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound attentive, transport your SLC 300 to Mercedes-Benz and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, notably aftermarket parts and accessories, or using OEM elements original place might rate a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are necessary for your 2018 Mercedes-Benz SLC 300. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, fundamental to more costly repairs.
  • Your 2018 Mercedes-Benz SLC 300 has a vacuum leak. Every Mercedes-Benz SLC 300 has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, notably if they’re exposed to imposing heat or extreme nice.
  • Your mass airflow sensor (known as MAF) needs to be changed. The mass airflow sensor in your Mercedes-Benz SLC 300 is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Mercedes-Benz SLC 300 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is low or dead. The battery in your 2018 Mercedes-Benz SLC 300 is every decisive. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Mercedes-Benz you drive, but check our contemporary service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be changed. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less pragmatic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2018 Mercedes-Benz SLC 300's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the proper mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a automobile to fail an emissions test.
  • One of the most attentive and countless cause is that your 2018 Mercedes-Benz SLC 300 gas cap is loose, damaged or missing. The gas cap for your 2018 Mercedes-Benz SLC 300 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't costly. If your check engine light turns on quickly after you put gas in your 2018 Mercedes-Benz SLC 300, original thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.