Please wait while the page loads...

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2021 Mercedes-Benz GLC 300 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few extra ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2021 Mercedes-Benz GLC 300. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of definitive things. It can be as classic as your gas cap being loose or as productive as engine knocking. If your check engine light is on in your 2021 Mercedes-Benz GLC 300, contact Plaza Motor Company. Our Mercedes-Benz service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is shining. Contact Plaza Motor Company today!

How many miles can you drive with the check engine light?

If you check engine light is flashing, we illustrate that you pull over and contact Plaza Motor Company to help find out if your vehicle is safe to drive in or if we illustrate a tow truck. Since each check engine code has its own level of severity, it is crucial to predict how copious miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.

2021 Mercedes-Benz GLC 300 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your GLC 300. There are hundreds of added codes that your check engine light can hint. While that sounds daunting, with a little patience, tackling basic diagnostics will give you fitting knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, noticeable and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of lucid OBD codes, there are also hundreds of lucid reasons for the light, including:

  • Bad Spark Plugs
  • Computer output circuit issues
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Ignition system faults
  • Old Battery

This is why it is essential for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out immediately by a certified Mercedes-Benz mechanic. Call Plaza Motor Company at 3145825294 immediately or schedule your check engine light service online today! If the engine light comes on due to a precarious concern, you risk destructive your car distinctive by not repairing the issue right away.

Is it safe to drive your 2021 Mercedes-Benz GLC 300 with the check engine light on?

If the check engine light is flashing, this means that there is a admissible issue and it is recommended to service your Mercedes-Benz GLC 300 immediately. This question is not very natural because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to travel to work. This is typically indicated by a logical glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more admissible problem. Call the veterans at Plaza Motor Company by dialing 3145825294 so you can describe the issues. Or cut down your speed and bring your 2021 Mercedes-Benz to our certified mechanics as soon as conceivable.

How much does it cost to get the engine light checked?

The average rate for a check engine light diagnosis & testing is commonly between $88 and $111. The fair news, Plaza Motor Company offers complimentary multi-point inspections and free diagnostics, in most cases, to assist indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not well tightened to a more relentless failure like a destructive catalytic converter or a problem with one of the car's oxygen sensors, so it fair to get the acceptable code reading and diagnosis.

What could cause the check engine light to come on in a 2021 Mercedes-Benz GLC 300?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a important problem that could cause important damage to your engine and come with a astonishing repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less important but a flashing check engine light indicates that your vehicle’s engine is in important trouble and service is fundamental immediately. If your check engine light is flashing in your 2021 Mercedes-Benz GLC 300, we highly recommend not to drive the car and schedule Mercedes-Benz service immediately. Below is a list of the most common reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less direct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2021 Mercedes-Benz GLC 300's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to elect for the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Mercedes-Benz GLC 300 is what determines how much fuel is paramount to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Mercedes-Benz GLC 300 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your 2021 Mercedes-Benz GLC 300 has a vacuum leak. Every Mercedes-Benz GLC 300 has a vacuum system that performs a wide variety of functions. The vacuum system also helps reduce harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to forceful heat or extreme charming.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or disparate item can wreak havoc on your 2021 Mercedes-Benz GLC 300 if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prohibit the vehicle from starting. If these issues sound prevalent, deliver your GLC 300 to Mercedes-Benz and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a slight bit more but could save you money from having to get scanty work and damage caused by scanty installation work corrected.
  • The battery is low or dead. The battery in your 2021 Mercedes-Benz GLC 300 is every direct. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Mercedes-Benz you drive, but check our modern service coupons and specials.
  • New Spark Plugs or Plug Wires are paramount for your 2021 Mercedes-Benz GLC 300. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, big to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2021 Mercedes-Benz GLC 300’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Plaza Motor Company offers a complimentary multi-point inspection with every Mercedes-Benz service. If you have an issue with your catalytic converter and don't get it repaired, your 2021 Mercedes-Benz GLC 300 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause disparate problems from overheating.
  • One of the most commonplace and frequent cause is that your 2021 Mercedes-Benz GLC 300 gas cap is loose, damaged or missing. The gas cap for your 2021 Mercedes-Benz GLC 300 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on hastily after you put gas in your 2021 Mercedes-Benz GLC 300, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

2021 Mercedes-Benz GLC 300 Check Engine Light Flashing

Although there are plentiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful natural causes including something as authentic as a loose gas cap. Diverse natural reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Mercedes-Benz Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Mercedes-Benz issue was fixed.

Every 2021 Mercedes-Benz GLC 300 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its hard systems. The sensors are generally detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Plaza Motor Company provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service licensed.

2021 Mercedes-Benz GLC 300 Check Engine Light

If the check engine light in your 2021 Mercedes-Benz GLC 300 starts flashing, that means that the problem needs prompt attention and your Mercedes-Benz should be brought in now. A flashing light indicates that the problem is critical and if not taken care of now may result in important break to the vehicle. This flashing light commonly suggests a harsh engine misfire allowing unburned fuel to be drained into the exhaust system. There it can swiftly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, traditional or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Plaza Motor Company at this moment by calling 3145825294. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a exceedingly expensive repair.

Check Engine Light Service 2021 Mercedes-Benz GLC 300

What do you do when you’re driving along in your Mercedes-Benz GLC 300 and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Mercedes-Benz owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2021 Mercedes-Benz GLC 300 checked as soon as correct. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2021 Mercedes-Benz GLC 300's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t feasible, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic audit tool that is used by our Mercedes-Benz auto repair mechanics at Plaza Motor Company. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an direct mechanical to mean the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2021 Mercedes-Benz GLC 300 will generally shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2021 Mercedes-Benz GLC 300 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Plaza Motor Company so the light and code can be double-checked and reset.